Shure PSM 300 Stereo Personal In Ear Monitoring System with SE215-CL Earphones – H20 Band 518.200 – 541.800 MHz

The PSM 300 Stereo Personal Monitor System delivers detailed 24-bit digital audio and reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Dependable wireless coverage extends over 300 ft (90 m) of range and eliminates dropouts. Easy to setup and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume using MixMode technology or stereo mode to create a personal mix from two channels of audio.

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode technology or stereo mode to create a personal mix from two channels of audio. The P3TRA215CL-H20 operates in the frequency range of 518-542 mHz.

Features:

• Send two channels of audio wirelessly to performers onstage
• 24-bit digital audio provides clear, detailed sound
• Patented Audio Reference Companding sounds more like wired
• Up to 90 dB signal-to-noise ratio
• Exceptionally wide stereo separation
• Solid analog RF connection over a 300 ft (90 m) range
• Create a personal mix from the bodypack with MixMode technology or stereo mode
• Frequency scan and IR sync quickly finds and assigns a clean channel
• Half-rack, single channel transmitter with included rack mount kit
• P3R bodypack systems available with SE112 Sound IsolatingT Earphones
• P3RA professional bodypack systems available with SE215 Sound Isolating Earphones

Specifications:

• PSM300 System Specifications
• RF Carrier Range: 488-937.5 MHz (Varies by region, see frequency range and output power table).
• Compatible Frequencies Per band: up to 15.
• Tuning Bandwidth: 24 MHz maximum (Note: varies by region).
• Operating Range Environment dependent: 90 m (300 ft).
• Audio Frequency Response: 38 Hz-15 kHz.
• Signal-to-Noise Ratio A-weighted: 90 dB (typical).
• Total Harmonic Distortion ref. ±34 kHz deviation @1 kHz: <0.5% (typical).
• Companding: Patented Shure Audio Reference Companding.
• Spurious Rejection ref. 12 dB SINAD: >80 dB (typical).
• Frequency Stability: ±2.5 ppm.
• MPX Pilot Tone: 19 kHz (±1 Hz).
• Modulation: FM, MPX Stereo (ref. ±34 kHz deviation @ 1 kHz).
• Operating Temperature: -18 °C (0 °F) to +63 °C (145 °F).
  P3T Wireless Transmitter
• RF Output Power: 10, 20, 30 mW Note: varies by region.
• RF Output Impedance 50 O (typical)
• Net Weight 783 g (27.6oz.)
• Dimensions 43 x 198 x 172 mm (1.7 x 7.8 x 6.8 in.), H x W x D
• Power Requirements 12-15 V DC, 260 mA maximum
• Audio Input
• Connector Type 6.35 mm (1/4″) TRS
• Polarity Tip positive with respect to ring
• Configuration Electronically balanced
• Impedance 40 kO (actual)
• Nominal Input Level Switchable, +4 dBu, -10 dBV
• Maximum Input Level +4 dBu: +22 dBu
• -10 dBV: +12.2 dBu
• Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
• Phantom Power Protection Up to 60 V DC
• Audio Output
• Connector Types 6.35 mm (1/4″) TRS
• Configuration Electronically balanced
• Impedance Connected directly to inputs
  P3RA Professional Wireless Bodypack Receiver
• Active RF Sensitivity (at 20 dB SINAD): 2.2 microvolts
• Image Rejection: >90 dB
• Adjacent Channel Rejection: >60 dB
• Intermodulation Attenuation: >50 dB
• Blocking: >60 dB
• Audio Output Power 1 kHz @ <1% distortion, peak power, @32 ohms: 80 mW (per output).
• Minimum Load Impedance: 16 ohms
• Headphone output: 3.5 mm (1.8″) stereo
• Net Weigh:t 196 g (6.9 oz.) (with batteries)
• Dimensions: 99 x 66 x 23 mm (H x W x D)
• Battery Life (continuous use); 4-5.5 hours, AA batteries, 5.5-7 hours, SB900A battery