Shure SLXD4QDAN+ Digital 19 Inch Quad Receiver with Dante Audio Connectivity 19 Inch Rack Mount Kit – 470-608 MHz

The Shure SLX-D® Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with streamlined network-ready setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design in a convenient full-rack quad configuration, the SLXD4QDAN+ efficiently saves space and accessories, and easily scales to match channel requirements with Dante Audio connectivity.

Features:

• Four channels in one rack space
• Dante Audio Networking, carried on single Ethernet cable
• Wide 138 MHz tuning range
• 32 available channels per frequency band (region dependent)
• Transparent 24-bit digital audio
• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
• 118 dB dynamic range
• Audio Summing matches receiver output to available mixer channels (4, 3, 2 or 1)
• RF Cascade creates an 8-channel system by linking two SLXD4Q+, no other accessories required
• Bias Voltage power supply management
• Digital predictive switching diversity
• Easy pairing of transmitters and receivers over IR scan and sync
• 4 XLR and 4 ¼” outputs and 2 local ethernet connections
• Compatible with Shure Wireless Workbench® control software
• Rugged metal construction

Specifications:

RF
• RF Carrier Frequency Range: 470 – 608 MHz
• Working Range: 328′ (100m)
• RF Tuning Step Size: 25 kHz
• Image Rejection: >85 dB
• RF Sensitivity: -97 dBm at 10^-5 BER

  RF Input

• Spurious Rejection: >75 dB
• Connector Type: BNC
• Impedance: 50Ω
• Bias Voltage: 15V DC, 150 mA max

  Audio

• Latency: 3.2ms
• Audio Frequency Response: 20 Hz – 20 kHz (+1, -2 dB)
• Audio Dynamic Range (A-Weighted): 118 dB @1% THD
• Total Harmonic Distortion: <0.02%
• System Audio Polarity:
  – XLR: Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output.
  – TRS: Postive pressure on microphone diaphragm produces positive voltage on the tip of the 6.35 mm (¼-inch) with respect to the ring of the 6.35 mm output.

  Audio Output

• Audio Frequency Response: 20 Hz – 20 kHz (+1, -2 dB)
• Gain Adjustment Range: -18 to +42 dB in 1 dB steps
• Configuration:
  – ¼” (6.35mm): Balanced (Tip=audio +, Ring=audio -, Sleeve=ground)
  – XLR: Balanced (1=ground, 2=audio +, 3=audio -)
• Impedance:
  – ¼” (6.35mm): 1.1kΩ (550Ω Unbalanced)
  – XLR (line): 500Ω (250Ω Unbalanced)
  – XLR (mic): 150Ω
• Full Scale Output:
  – ¼” (6.35mm): +12 dBV Unbalanced (+18 dBV Balanced)
  – XLR (LINE setting): +18 dBV
  – XLR (MIC setting): -12 dBV
• Mic/Line Switch: 30 dB pad
• Phantom Power Protection:
  – ¼” (6.35mm): Yes
  – XLR: Yes

  Cascade Output

• Connector Type: BNC
• Configuration: Unbalanced
• Impedance: 50Ω
• Insertion Gain: 0-2 dB typical

  Networking

• Network Interface: 20 Hz – 20 kHz (+1, -2 dB)
• Network Addressing Capability: DHCP or Manual IP address
• Meximum Cable Length: 328′ (100m)

  Physical

• Dimensions: 1.65″ x 15.47″ x 5.98″ (42mm x 393mm x 152mm)
• Weight: 3.85lbs (1.75kg)
• Housing: Galvanized Steel
• Power Requirements: 15V @ 1.03A

  Environmental

• Operating Temperature Range: 0°F – 122°F (-18°C – 50°C)
• Storage Temperature Range: -20°F – 165°F (-29°C – 74°C)