JBL CONTROL 52-WH 2.5-Inch 16 Ohm 50 Watt Surface-Mount Satellite Speaker for Control 50 Subwoofer – White – Pair
Original price was: $180.00.$150.00Current price is: $150.00.
JBL CONTROL 52-WH 2.5-Inch 16 Ohm 50 Watt Surface-Mount Satellite Speaker for Control 50 Subwoofer – White – Pair. Gear by The Penn Group.
In stock
Description
The stylish JBL Control 52 satellite loudspeaker produces superb high fidelity sound via a low distortion 60mm (2.5″) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19mm (0.75″) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.
For full-range wide-bandwidth performance, either 2 or 4 Control 52P mid-high speakers can be driven from the Control 50S/T pendant subwoofer (or from a Control 60PS/T pendant or Control 40CS/T in-ceiling subwoofer – items sold separately). The crossover for this subwoofer-satellite system is included in the subwoofer, and the system can be driven either low-impedance or from a 70V/100V distributed speaker line.
Features:
- Stylish, unobtrusive design fits into a wide variety of decors
- Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers
- 16 ohms impedance
- Wall-mount brackets included
Specifications:
- Frequency Range (-10dB): 140Hz – 20kHz
- Frequency Response (±3dB): 180Hz – 17kHz
- Power Rating:
– 50 Watts Continuous Program Power (2 hrs)
– 25 Watts Continuous Pink Noise (2 hrs)
– 30 Watts Continuous Program Power (100 hrs)
– 15 Watts Continuous Pink Noise (100 hrs) - Sensitivity: 85dB (4.0V/1m = 1W), 82dB (2.83V, 1m)
- Coverage Angle: Omnidirectional
- Maximum SPL (1m): 94dB average, 100dB peak
- Impedance: 16 ohms
- Drivers: 2.5″ (60mm) with polypropylene cone, butyl rubber surround, 0.75″ (19mm) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
- Input Connectors: Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5mm²)
- Enclosure: High impact polystyrene, painted zinc-plated metal grille
- Dimensions (HxWxD):
– Cabinet: 4.5″ x 3.3″ x 3.75″ (115mm x 84mm x 96mm)
– Wall Bracket: 2.0″ (51mm) - Net Weight (each): 1.5lbs (0.7kg)
- Shipping Weight: 1.8lbs (0.8kg)
- Grille: Zinc-plated steel
- Mounting Hardware: Included wall swivel ball bracket
Additional information
Weight | 7.4 lbs |
---|
Reviews
There are no reviews yet.