Shure ANX4 1RU Scalable Wireless Receiver with AC Power – up to 16-Ch of Axient Digital or 24-Ch of ULX-D via Licenses

Maximize Channel Count and Minimize Space with Scalable and Adaptable Wireless Audio.
The ultimate flexible high-tier, high channel count wireless receiver, Shure ANX4 provides up to 16 channels of Shure Axient Digital or 24 channels of Shure ULX-D wireless, enabled by digital licenses available for purchase in single and four-channel increments (sold separately). All exceptional features found in award-winning Axient Digital and ULX-D receivers that have made them industry standards are available in the ANX4.

Whether you activate ANX4 in Axient Digital or ULX-D transmission mode, ANX4 maximizes your budget and rack space in delivering large channel counts in a 1RU format while also streamlining your antenna configuration.

Shure ANX4 is scalable high-tier wireless that adapts to your needs! Own more than one ANX4? Manage and deploy the channel licenses you own across your ANX4 units in your facility, venue, or rental inventory as needed.

Please Note: *ANX4 does not ship preconfigured with active wireless channels. Digital licenses, sold separately, required for operation.

Licenses:
1-Channel license: SH-ANX4-1CL
4-Channel license: SH-ANX4-4CL

**System features are dependent upon activated transmission mode: Axient Digital or ULX-D (ANX4 does not support both systems, or both system features, at one time).

Once purchased, ANX4 channel licenses can be activated in one ANX4 and later removed and activated in a different ANX4. This is especially beneficial for users who own multiple ANX4 units serving various needs that change over time. Shure ANX4 delivers innovative, space-saving hardware, award-winning wireless audio features, and the ability to scale to the number of wireless channels your project demands.

Features:

• Scalable Wireless Receiver for use with Axient Digital and ULX-D wireless systems
• Receives up to 16 channels of Axient Digital or 24 channels of ULX-D in a single rack space
• Single and four-channel digital licenses (sold separately)
• Wide tuning range covers 174MHz to 2GHz, covering all Axient Digital and ULX-D options (except for the ULX-D 902 MHz band)
• All Axient Digital or ULX-D features included**
• Large, 6.6″ front panel color display
• Five-segment Channel Quality meter displays RF signal-to-noise
• 1x 1/4″ front-panel headphone connector for monitoring with Dante Browse (for both Axient Digital and ULX-D)
• Streamlined and cost-saving antenna setup for large-scale wireless deployment
• 4x Ethernet ports for network control and Dante/AES67 digital output options
• 4x coaxial RF antenna input connectors support multiple frequency bands and provides greater coverage for complex setups
• Networked control with Shure Wireless Workbench® for extended and enhanced RF monitoring and management
• DC module version available to support redundant power

Specifications:

RF Input
• Spurious Rejection: > 80dB, typical
• Connector Type: BNC
• Impedance: 50Ω
• Configuration: Unbalanced, passive
• Bias Voltage: 12V – 13.5V DC, 150mA maximum, per antenna. Switchable on-off.
• Insertion Loss: 0dB, typical

  RF

• RF Carrier Frequency Range: 174MHz – 2000MHz
• Working Range: 330ft (100m)
  *Note: Actual range depends on RF signal absorption, reflection, and interference.
• Gain Adjustment Range: -18dB – +42dB in 1dB steps (plus Mute setting)
• RF Tuning Step Size: 25kHz, varies by region
• Image Rejection: > 90dB, typical
• RF Sensitivity: ULX-D: -95dBm at 10-5 BER
• Axient Digital: -93.5dBm at 10-5 BER

  Audio

• Latency:
  – ULX-D Standard: < 2.9ms
  – ULX-D High Density: < 3.2ms
  – Axient Digital Standard: < 2.1ms
  – Axient Digital High Density: < 3.0ms
• Audio Frequency Response: 20Hz – 20kHz (±1dB)
• Audio Dynamic Range:
  – Typical, 20Hz – 20kHz
  – System Gain @ +12dB: 124dB A-weighted
• Total Harmonic Distortion: -6dBFS, 1kHz, System Gain @ +12dB < 0.1%
• System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4″ output

  Headphone Monitor Output

• Audio Frequency Response: 20Hz – 20kHz (±3dB)
• Configuration: 1/4″ connector, unbalanced stereo
• Impedance: 63Ω
• Maximum Signal Level: 350mW
• Pin Assignments Tip: Audio +, Left Ring: Audio + Right Sleeve: Ground

  Networking

• Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Cable Length: 330ft (100m)

  Physical

• Dimensions: 1.7″ x 19.0″ x 11.3″
• Weight: 8.6lbs
• Housing: Steel; extruded aluminum (Case Top: Aluminum)
• Thermal Power Dissipation:
  – Maximum: 61.3W (209.3 BTU/hr)
  – Idle: 49.2W (167.9 BTU/hr)
• Power Requirements: AC: 100V – 240V AC, 50-60Hz, 1.4A max
• Fuse: T5A
• Operating Temperature Range: 0°F – 122°F (-18°C – 50°C)
• Storage Temperature Range: -20°F – 165°F (-29°C – 74°C)

Item Includes:

• 1x ANX4 (AC Power)
• 1x Rackmount Kit
• 1x Ethernet Cable (Short)
• 1x Ethernet Cable (Long)
• 2x BNC Cable
• 2x BNC Bulkhead Adapters