Shure PSM1000 2-Channel Personal In-Ear Monitor System w/2x Body-pack Receivers & 2x Earphones – 614-616MHz

The Shure P10TR+425CL-J8A is a PSM1000 2-Channel Rack Mount Personal Monitor Transmitter (614-616MHz), 2 P10R+ Body-Pack Receivers and 2-Pair of SE425 Sound-Isolating Earphones along with antennas, hardware, rackmounts and more!

PSM® 1000. Trust your ears.
As a singer, musician, or audio professional, what you hear is fully half the battle in the largest arenas, biggest stages, and most crowded broadcasting events in the world. Shure PSM 1000 in-ear monitoring system delivers superb audio quality, pristine RF signal with more on-air channels, and a streamlined setup and use.

More Channels on Air
Deliver up to 39 channels in a single frequency band with the widest PSM tuning range, ultra-linear RF transmission, and fewer dropouts than any other system.

Enhanced RF Performance
P10R+ twin-antenna diversity bodypack receivers with advanced digital signal processing technology dramatically improve signal reception and increase range

Dual-Channel, Networkable Transmitter
Expand your wireless control. Simplify setup for high channel counts. The P10T is a full-rack, dual-channel transmitter housed in a touring-grade, all-metal chassis, with networked control via ethernet

Wireless Workbench. Smarter Network Management
PSM 1000 is fully networkable with Shure Wireless Workbench® software. From pre-show planning through post-performance analysis, work with a friendly interface with more features for professional monitoring and management of your entire wireless system.

Features:

• Up to 72 MHz Tuning Bandwidth (region dependent) provides flexibility in today’s crowded and unpredictable RF environments.
• P10T is a full-rack, dual-channel wireless transmitter housed in a touring-grade, all-metal chassis
• P10R+ diversity analog/digital bodypack receiver offers advanced digital signal processing technology that delivers unparalleled audio quality with more headroom, better stereo separation, and higher fidelity
• Networked control via Ethernet connection vastly simplifies setup for high channel counts and enables remote control via Wireless Workbench® software
• Internal power supply with IEC in/out ports enables easy power chaining in the rack
• Precision front-end RF filtering reduces RF interference for a cleaner, stronger RF signal, fewer dropouts, and less audible artifacts
• CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels on one bodypack for quick and easy reference
• Patented Audio Reference Companding provides natural and transparent sound
• Backwards compatibility with PSM® 900 receivers for simplified inventory management

Specifications:

• PSM1000
• RF Output Power Selectable: 10, 50, 100 mW (regionally dependent)
• RF Output Impedance: 50 Ω (typical)
• Net Weight: 4.7 Kg (10.4 lb)
• Dimensions: 44 X 483 X 343 mm
• Power Requirement: Input: 100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded), Output: 100-240V AC, 5A max, unswitched
• Connector Type: Combination XLR and 6.35 mm (1/4″) TRS
• Polarity: XLR: Non-inverting (pin 2 positive with respect to pin 3), 6.35 mm (1/4″) TRS: Tip positive with respect to ring
• Configuration: Electronically balanced
• Impedance: 70.2 kΩ (actual)
• Nominal Input Level Switchable: +4 dBu, -10 dBV
• Maximum Input Level: +4 dBu: +29.2 dBu, -10 dBV: +12.2 dBu
• Pin Assignments: XLR: 1=ground, 2=hot, 3=cold, 6.35 mm (1/4″) TRS: Tip=hot, Ring=cold, Sleeve=ground
• Phantom Power Protection: Up to 60 V DC
• Connector Type: 6.35 mm (1/4″) TRS
• Configuration: Electronically balanced
• Impedance: Connected directly to inputs

  P10R+-J8A

• Front-End RF Filtering: Tri-Band, Dual Stage 3-Pole Chebyshev
• Active RF Gain Control: Adjusts Receiver RF Sensitivity to provide 31 dB more RF Dynamic Range
• Squelch Threshold: 22 dB SINAD (±3 dB) default setting
• RF Sensitivity: 2.2 uV at 20 dB SINAD
• Image Rejection: >90 dB typical
• Adjacent Channel: Rejection >70 dB
• Intermodulation Attenuation: >50 dB (referenced to 30 dB SINAD with -80 dBm on channel signal at 45 kHz deviation of a 1 kHz tone) >70 dB for 12 dB SINAD
• Blocking: >80 dB
• Audio Output Power: 100 mW (per output) 1 kHz @ <1% distortion, peak power, @32Ω
• Minimum Load Impedance: 9.5Ω
• High Boost Selectable: +2 dB, +4 dB @ 10 kHz
• Volume Limiter Selectable: 3-9 Limits volume adjustment knob. Selected value analogous to volume knob increment.
• Net Weight: 196 g (6.9 oz) with 2 AA batteries
• Dimensions: 99 mm x 66 mm x 23 mm (3.9 in. x 2.6 in. x 0.9 in.)
• Battery Life: 6 hours typical using AA batteries

  SE425

• Speaker Type: Dual High-Definition MicroDrivers
• Sensitivity (1kHz): 109 dB SPL/mW
• Impedance (1kHz): 22 Ω
• Noise Attenuation: Up to 37 dB
• Frequency Range: 20Hz – 19kHz
• Input Connector: Gold-plated 3.5 mm (1/8″)
• Cable: 64″ Detachable (at ear) with wireform fit
• Color: Available in Clear or Metallic Silver

Item Includes:

• Shure P10T Full-Rack Dual-Channel Wireless Transmitter (J8A: 554 to 608 + 614 to 616 MHz)
• 2 x Antennas
• 1 x Power Cable
• 1 x Hardware Kit (Rackmounting Screws)
• 2 x Shure P10R+ Wireless Bodypack Receiver (J8A: 554 to 608 + 614 to 616 MHz)
• 2 x Antennas
• 2 x Shure SE425 Sound Isolating In-Ear Stereo Headphones (Clear)
• 1x 1/4″ Adapter
• 1x Carrying Case
• 3 x Pairs of Flex Sleeves (S/M/L)
• 3 x Pairs of Black Foam Sleeves (S/M/L)
• 1 Pair of Triple Flange Sleeves
• 1 Pair of Yellow Universal Fit Foam Sleeves

Warranty:

• Limited 2-Year Manufacturer Warranty