JBL Control 31WH 2-Way Control Contractor On-Wall Speaker with 250mm High Power – White

The JBL Control 31 utilizes high-power components, computer optimized horn, and a complex network to achieve smooth, powerful high-fidelity performance, extended bandwidth, and well-controlled defined coverage from a compact loudspeaker.

The 250 mm (10 inch) low-frequency driver features a woven fiberglass cone for a high degree of weather capability and pure butyl rubber surround for clean sound quality, a high-temperature fiberglass voice coil former for high sensitivity, high output capability and stable performance under long-term high power working conditions. The optimized cone geometry provides for smooth frequency response and good off-axis performance. A linear suspension spider provides low distortion, while FEA-optimized motor construction produces minimum harmonic distortion. An aluminum coupler ring outside the pole post further reduces distortion and further increases the sensitivity.

The high-output high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion.

Features:

• 250 mm (10 in) woven fiberglass cone LF driver with 52 mm (2 in) voicecoil
• High-output 2414H-C compression driver with 25 mm (1 in) exit, unique (patented) design and high-temperature polymer diaphragm
• 250 Watt capability (in 8Ω thru setting), plus 150 Watt transformer for 70V or 100V distributed lines, with 8Ω thru bypass
• Extended bandwidth, extremely smooth frequency response
• Highly outdoor-capable design with included WeatherMax™ multi-layer grille and optional marine-kit grille for salt-air environments
• 110° x 110° symmetrical coverage
• Includes InvisiBall® mounting hardware plus ten 6 mm attachment points for suspension and optional U-bracket
• Included sealed input panel cover and screw-down input terminals for secure connection

Specifications:

• Frequency Range (-10 dB): 33Hz – 19kHz
• Frequency Response (;plusmn3 dB): 42Hz – 14kHz
• Power Ratings: 250 W (1000 W peak), 2 hrs; 200 W (800 W peak), 100 hrs.
• Maximum SPL @ 1m: 116 dB continuous (123 dB peak)
• Nominal Sensitivity: 92 dB
• Coverage Angle: 110° x 110°
• Directivity Factor (Q): 5.7, averaged 500 Hz to 10 kHz
• Directivity Index (DI): 7.3 dB, averaged 500 Hz to 10 kHz
• Nominal Impedance: 8 ohms
• Crossover Type: 2nd order low-pass, 2nd order high-pass, plus conjugate shaping circuitry.
• Transformer Taps: 70V: 150W, 75W, 38W, 19W, 100V: 150W, 75W, 38W
• Insertion Loss: <0.65 dB at any tap setting
• Thru Setting: 8;Omega; nominal
• Recommended High-Pass: Protective 40 Hz high-pass (24 dB/oct) for any transformer tap and for 8;Omega; operation
• Low Frequency: 250 mm (10 in) woven-fiberglass cone with pure butyl rubber surround, 52 mm (2 in) voice coil on high-temperature fiberglass voice coil former, optimized cone geometry, linear suspension spider, FEA-optimized motor construction, aluminum ring on pole piece.
• High Frequency: JBL 2414H-C compression driver with 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, JBL-patented design, fluid-cooled.
• Enclosure Material: High impact Polystyrene (HIPS) with 10% glass fill plus patent-pending internal 5 mm foamed polyurethane secondary mold for additional cabinet density.
• Grille: Zinc-plated and thermoset-composite coated steel, WeatherMax™ multi-layer foam with tight-weave mesh vapor barrier.
• Installation: InvisiBall wall-mounting system included. Ten 6 mm attachment points on cabinet for suspending or for optional U-bracket. One 6 mm secondary safety attachment point (for forged shoulder steel eyebolt, not included) on back panel.
• Environmental: IP-55 per IEC529. Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray. Optional MTC-30MK marine-kit grille increases longevity in highly corrosive environments.
• Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2).
• Agency Rating: Transformer is listed per UL1876
• Colors: White (-WH, RAL9003)
• Dimensions: 593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in)
• Weight (ea): 18.8 kg (41.5lb)
• Shipping Weight (ea): 22.0 kg (48.5 lb)
• Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall wall-mounting system, 6 mm x 305 mm InvisiBall hex wrench